Eucalyptus: pruning

Eucalyptus is an attractive evergreen tree grown mainly for its foliage and peeling bark. These trees can grow quite large if left unpruned, but pruning techniques, like coppicing and pollarding, mean you can enjoy this tree in even a small garden.

Pruning Eucalyptus
Pruning Eucalyptus

Quick facts

Suitable for Eucalyptus sp.
Timing Late winter to early spring (February to March)
Difficulty Easy

Suitable for...

Young eucalyptus specimens need some formative pruning to grow into well-shaped mature trees. Some species can also be trained into multi-stemmed bushes, either by coppicing an established tree, or by training two-year-old trees as multi-stemmed shrubs from the beginning of their life.

If you have a small garden, consider coppicing or pollarding established trees. Both these methods will keep their size under control.

Coppicing creates a multi-stemmed bush, by chopping back the stems to the ground every year or every few years. It is particularly good for Eucalyptus gunnii, E. globulus, E. dalrympleana and E. pauciflora as it not only encourages new stems each year, but also juvenile leaves, which some people say are more attractive than the mature eucalyptus leaves.

Pollarding restricts the growth once it reaches a certain height through pruning. Pollarding is more difficult and you usually would require the services of an professional aborist, especially if working at heights. Pollarding is suitable for E. dalrympleana and E. pauciflora.

When to prune eucalyptus

Formative pruning, coppicing and pollarding of eucalyptus are best carried out in late winter to early spring (February to March), just before plants are actively in growth.

How to prune eucalyptus

Formative pruning as a standard tree

Standard trees have a clear trunk and a head, or canopy, of branches. Young eucalyptus can be grown as standards with a 1-2m (3¼ -6½ ft) trunk.

Eucalyptus grow with a clear central leading branch that grows upwards ahead of the other branches. It is important not to cut this central leader, as this could spoil the final shape of the tree.

Suitable for: E. coccifera, E. dalrympleana, E. gunnii, E. parvifolia, E. pauciflora, E. pulvurulenta and E. urnigera.

Year one

  • Remove all side branches from the lower third of the main stem
  • Shorten by half all the sideshoots on the middle third of the main stem
  • Leave the sideshoots on the top third of the main stem unpruned, apart from the removal of dead, diseased or damaged growth
  • Cut to outward facing buds, so that the resulting growth extends outwards rather than into the centre of the tree

Year two

  • Remove completely the side shoots that were shortened by half in year one (which should be now be in the lower third of the tree)
  • Shorten by half the sideshoots on the middle third of the tree
  • Remove any crossing or misplaced branches in the upper third of the tree

Year three

  • Follow the same steps as for year two

Years four and five

  • Clear the trunk of side branches to the height desired
  • Continue to remove any crossing, dead, diseased or misplaced branches from the canopy

Formative pruning as a multi-stemmed bush

This method is particularly suitable for two-year-old trees of Eucalyptus gunnii, E. globulus, E. dalrympleana and E. pauciflora, as it shows off their attractive, rounded juvenile foliage.

Year one

  • Cut the main stem of a two-year-old tree straight across at the desired height, cutting as low as 8cm (3in) from ground level if required. Trim the wound so that there are no rough edges

Year two

  • Multiple branches should have regenerated from the wound and from below ground level. Select three or four of these (choosing strong, well-spaced branches), and remove all other branches completely, cutting them back to the base

Year three and onwards

  • Allow sideshoots to develop from the chosen branches, removing only those sideshoots that are too low and dragging on the ground, or are crossing, rubbing or otherwise badly placed  
  • Remove any excess new stems arising from the base
  • Occasional thinning of congested side branches may be necessary as the bush matures
  • Established trees require little pruning other than the removal of any dead material

Coppicing and pollarding eucalyptus

Coppicing and pollarding are best initiated early in the life of the tree, rather than used on over large or damaged mature trees, which may or may not regenerate in response.

  • To coppice a eucalyptus, cut back the trunk or branches to 5-7.5cm (2-3in) above the ground or to the stubs left the previous year 
  • When pollarding a eucalyptus, cut back to stubs on the main trunk, usually 2m (6½ft) high

Problems

Eucalyptus is usually trouble-free, but may occasionally suffer from oedema, and from the very similar-looking eucalyptus gall wasp. In cooler or exposed areas, they may suffer from frost, wind and other winter damage.

Young shoots on recently coppiced trees can be vulnerable to snapping off in strong winds. Further shortening in subsequent seasons to encourage stockier growth may reduce the risk.

Join the RHS

Become an RHS Member today and save 25% on your first year

Join now

Gardeners' calendar

Find out what to do this month with our gardeners' calendar

Advice from the RHS

Get involved

The Royal Horticultural Society is the UK’s leading gardening charity. We aim to enrich everyone’s life through plants, and make the UK a greener and more beautiful place.